Galvanized Steel Door Frame Roll Forming Machine


Main Technical Parameter

A. Manual Decoiler
(1) Max Width: 1250mm
(2) Inner Diameter: 500mm
(3) Outer Diameter: 1200mm
(4) Max Weight Capacity: 5T

B. Roll Forming M/C
(1) Raw Material: Colored steel or galvanized steel
(2) Material Thickness: 1.5-2mm
(3) Working Speed: 8-12m/min; Adjustable
(4) Rollers: 20 rollers ( based on drawing )
(5) Material for Rollers: GCr15, polished, heated, quenched HRC55-60°
(6) Motor Power: 15KW
(7) Roller Diameter: 76mm
(8) Machine Side Plate Type: Guide Pin Type
(9) Transmission Type: Chain Transmission
(10) Appearance Size: About 10000mm x 1300mm x 1200mm
(11) Total Weight: About 8T
(12) Finished Sheet Product as Stipulation: GB/T 12755-91

C. Hydraulic Cutting
(1) Cutting Type: Hydraulic, automatic cutting
(2) Blade Material: Cr12 with polished, heated, quenched HRC 60-62
(3) Power: 3KW

D. Control System
(1) Electrical Control: PLC Frequency Control System with touch screen
(2) Voltage: 380V/3Ph/50Hz(or as your local standard)
(3) Length Error: ± 1mm

E. Output Table
(1) It is simple and used to load finished product
(2) Length: 4m


Working flow
Decoiling ----- Feeding Guide ----- Roll Forming ----- Hydraulic Cutting ----- Running out